Ray Strode [Wed, 20 Feb 2013 18:15:51 +0000 (13:15 -0500)]
modalDialog: emit 'closed' signal when dialog is closed
Opening and closing a modal dialog is not instant. There
is a transition animation involved. When the dialog is
finished opening, it currently emits the "opened" signal.
When it's finished closing, however, it doesn't emit a
"closed" signal. This means, there's not a good way to
know when the dialog finishes closing.
Florian Müllner [Wed, 20 Feb 2013 07:23:51 +0000 (08:23 +0100)]
workspacesView: Treat 'gesture-cancel' the same as 'gesture-end'
When a swipe scroll completes, we scroll the active workspace into
view. This works fine if the gesture is completed properly by
emitting 'gesture-end', but not when Clutter considers the gesture
cancelled - in that case, the view remains stuck in an intermediate
position. To fix, treat 'gesture-cancel' the same as 'gesture-end'.
layout: Rebuild struts and the input region when the Shell starts up
This means that windows will be positioned correctly with respect
to the panel when the shell starts up, and there won't be adjusting
after the session animation zooms in entirely.
Due to a bad rebase causing freezeUpdateCount to never get initialized,
these functions effectively did nothing. Since we're going to go to a
different mechanism for freezing region updates, let's just tear these
out now instead of fixing them before tearing them out.
AppDisplay: fake a release event to dnd when opening the menu
PopupMenuManager eats the next release event, which would otherwise close
the menu, so we need to tell dnd that we're handling it, and no drag should
be started, so it can ungrab the pointer and restore state.
The arrow origin must be in the coordinate space of the box pointer,
but it cannot be calculated when the box pointer is shown, because it's
not allocated yet, so pass the source to the boxpointer and adjust
the arrow at the next paint.
Ray Strode [Wed, 20 Feb 2013 02:51:41 +0000 (21:51 -0500)]
screenShield: don't use Bin for BackgroundManager container
St.Bin() really only expects one child at a time, and the
BackgroundManager will add two. This can cause assertion
failures when destroying one of the background actors.
Adel Gadllah [Tue, 19 Feb 2013 22:13:36 +0000 (23:13 +0100)]
workspace: Don't use grid layout
Right now we arrange the window thumbnails in a grid if there are more than two
rows of them. This was originally intended to reduce the amount of noise in the
thumbnail arrangement. It also made sense when the thumbnails were of a similar
size.
Nowadays we reflect the size of windows in the size of the thumbnail. This
leads to huge amounts of space between some windows when they are grid aligned.
Removing the grid alignment would also lead to larger thumbnails.
Ray Strode [Wed, 6 Feb 2013 19:17:19 +0000 (14:17 -0500)]
layout: don't bother hiding window group
Right now we hide the window group if we're a greeter.
We did this to avoid showing the background. These days
we don't add the background in the first place, so we
can drop this code.
Ray Strode [Mon, 4 Feb 2013 21:50:36 +0000 (16:50 -0500)]
background: add slide show support
gnome-desktop's background drawing code supports an
XML format for presenting backgrounds based on time of day,
monitor geometry, etc. Now that we don't use gnome-desktop for drawing the
background, we need to implement that support ourselves to maintain
feature parity.
Ray Strode [Wed, 6 Feb 2013 21:37:47 +0000 (16:37 -0500)]
loginDialog: put "Not Listed?" button and user list in separate container
The user list and the "Not Listed?" button get shown and hidden at the
same time, so we can simplify the code by putting them in a new
subcontainer.
This commit creates a userSelectionBox container that both actors get
put in, and changes all the code that shows and hides these actors to
show and hide userSelectionBox instead.
Ray Strode [Mon, 18 Feb 2013 01:41:40 +0000 (20:41 -0500)]
loginDialog: move prompt hiding code to hidePrompt
The sessionList and the prompt hint are all really
part of the prompt, so we should have the code that
hides those things in hidePrompt instead of in
showUserList.
Ray Strode [Wed, 6 Feb 2013 21:17:27 +0000 (16:17 -0500)]
loginDialog: use user widget when doing verification
Right now, when a user item is clicked we remove all other users from
the list and position the item in the appropriate place on screen.
Ultimately, we're going to want to crossfade from the fully populated
list to the user prompt. Since we're going to need to show the user
avatar in two different positions we can't simply move it.
This commit leaves the user item for the user list, and instead shows
a UserWidget actor during user verification, in the same way the
unlock dialog shows a UserWidget actor during reauthentication.
Florian Müllner [Mon, 18 Feb 2013 19:18:08 +0000 (20:18 +0100)]
appDisplay: Add additional view showing frequently used apps
According to the design mockups, the app picker should follow the
recent view pattern as used by applications, where the user is first
offered a subset of applications he/she is likely to start, and only
then allow switching to the full set of installed applications.
So implement the ability to manage several views in AppDisplay and add
FrequentView as additional view, which uses the existing ShellAppUsage
to display a list of frequently used applications.
Florian Müllner [Mon, 18 Feb 2013 20:04:51 +0000 (21:04 +0100)]
appDisplay: Make folder popups "view-modal"
While a group is open, we want to block events on items underneath,
but still allow interaction with components outside the app display
as well as scrolling of the view as a whole.
Florian Müllner [Thu, 31 Jan 2013 16:14:13 +0000 (17:14 +0100)]
appDisplay: Create AppFolderIcons for selected categories
App folders are intended for grouping some applications, not to
assign a category to every single application, so we will only
create folders for a selected subset of the existing categories.
Software/Alacarte will eventually allow to create/modify those
folders, so store the setting in GSettings so that it can be
shared with those applications.
Florian Müllner [Tue, 19 Feb 2013 20:31:05 +0000 (21:31 +0100)]
appDisplay: Separate app loading from filling the grid
At the moment when loading the applications, each app is inserted
at its correct (alphabetical) position. Avoid this overhead by
loading all apps first, then sort them once and fill the grid with
the sorted actors.
Florian Müllner [Mon, 18 Feb 2013 19:19:18 +0000 (20:19 +0100)]
appDisplay: Add intermediate stack widget to hold folder popups
AllView will be updated to allow app folders in addition to app
launchers. Folders will pop up in the existing view, so add an
additional stack widget into the hierarchy which popups will use
as parent.
Florian Müllner [Tue, 19 Feb 2013 22:23:41 +0000 (23:23 +0100)]
appDisplay: Make AlphabeticalView an abstract base class of AllView
We are going to introduce app folders, which will also present an
alphabetical list of applications, but use a different UI. In
preparation for that, split out the item logic into an abstract
base class.
Florian Müllner [Wed, 30 Jan 2013 22:58:42 +0000 (23:58 +0100)]
appDisplay: Merge AllAppDisplay and ViewByCategories
With categories removed, the separation between AllAppDisplay and
ViewByCategories no longer makes sense. Also use this opportunity
to rename the outdated AllAppDisplay to AppDisplay; it will
eventually be used to manage different views.
Florian Müllner [Wed, 30 Jan 2013 22:51:43 +0000 (23:51 +0100)]
appDisplay: Merge AppIcon and AppWellIcon
AppIcon is just a tiny wrapper around BaseIcon, which does not add
anything over using BaseIcon directly, so merge its code with
AppWellIcon. As the concept of the "app well" has not been used
since well before 3.0, use AppIcon as name for the merged class.
Ray Strode [Wed, 6 Feb 2013 22:40:02 +0000 (17:40 -0500)]
loginDialog: fix cancel from "Not Listed?"
Since commit 1ae0fadbf483128e27565baba6e8684bc5defca2 we
no longer start a PAM conversation as soon as the user clicks
the "Not Listed?" button. Instead we defer starting the PAM
conversation until the user types their username.
Unfortunately, the cancel button resets the dialog back to the
user list indrectly by cancelling the current PAM conversation.
This means if the user hasn't yet entered thier username then
the cancel button doesn't work.
This commit performs a direct dialog reset in the case the
PAM conversation hasn't been started yet.
shellEntry: Don't navigate forward before popping up the menu
Doing it before the grab messes up the grab helper's tracking
of where the focus was before, leading to it not tracking the
saved focus correctly, meaning that when we pop the menu back
down with escape, it doesn't restore focus correctly.
Aspects of the session mode aren't known immediately at
start up. For instance, sessionMode.isGreeter returns
false for greeter sessions until the asynchronous
operation completes.
This commit defers start up processing until the session
mode is fully known.
messageTray: Don't allow opening while entering/leaving the overview
The complex overview transition code means that there's no easy
way to handle with this right now. Blocking the message tray
while the overview is animating seems like the correct thing to do.
messageTray: Re-add the hotcorner when the panel is updated
The activities button may come and go at any moment now that we
have a dynamic panel. We need to re-check the activities button
whenever the panel is updated.
Adel Gadllah [Sun, 17 Feb 2013 13:20:34 +0000 (14:20 +0100)]
overview: Don't display minimized windows differently in the overview
Making them not fully opaque just makes them harder to see and there is no reason why the user should care whether the window is minimized or not when
switching to a window display them like any other windows.
projects / gnome-shell.git / log